YallStore's Blog|Your shopping weblog

Is there a thought about what the internal structure of Sony PSP like when you are playing it. Now follow me to get it.

1. Open the battery compartment cover which behind the body behind .  
2. First,  remove battery that is 1800mAh capacity.

3. There is a warning word in the battery compartment. You can not get the Sony repair service for PSP if you Peeled off the seals.

4. You can see the contact part of the analog joystick and LCD screen protective film in front panel; take off the front panel of the PSP, not so awe-inspiring look!

5. Remove the transparent and L, R key

6. The power switch and DC IN port peripheral

7. The part of the circuit of right □ ○ △ × key .

8.Conductive rubber of L, R keys

9. Remove the LCD screen below a row of buttons .

10. And remove part of the circuit of the left side of the arrow keys

11. Open the most mysterious part, the UMD stores, remove the back of the UMD hatch, it is very beautiful!

12.   UMD drive connected with the body and the screw, there is the data line still connect with the motherboard after remove.

13. Back to the front , unload LCD screen from the Border

14.There were two cables connect with the motherboard and LCD screen, is very fragile and complex.

15. Completely remove the LCD screen, still can not unplug UMD cable.

16. Remove the UMD drive and the LCD screen, the motherboard completely out of the show .It can be seen many connections and fixed-tape above.

17. Remove the motherboard, you can  see the installation of MS Duo card slot and deputy board of the wireless modules.

18. Motherboard picture

19. Vice-board connected by the antenna and thin wires

20. The wireless transmitter module covered by a metal cover to shield, the metal lid is a two-tier structure, remove the top layer may still can protect it

21.The back and the bald par of UMD drive.

22.PSP family after completely disassembled.